Cafetto Renew Descaler 2kg (2kg x 6 cartons)
PART
E11996-1
UPC: 9345941119963
Designed for espresso machines, boilers, and coffee brewers, the Renew Descaler contains a synergistic blend of organic acids that provide outstanding scale removal.
It can also be used in kettles, urns, and bain maries.
Certifications:
Directions:
For Espresso Machines
- Add 0.88oz (25g) of powder to 33.81oz (1L) of warm water, dissolve, and then pour the solution into the water tank.
- Remove the filter holder and turn the machine on.
- Place a cup under the brew spout and run out about 1 cup of the descaling solution. Run about a ¼ cup out through the steam arm. (For superautomatic machines run all the solution through the steam wand and set it on hot water - not the steam setting).
- Allow to stand for 15 minutes, and then repeat the process. Repeat the entire process until all the solution is used up.
- Rinse thoroughly by flushing one tank of clean fresh water through the system exiting through the brew head and the steam wand.
For Kettles:
- Fill kettle 3/4 full of potable water.
- Add 0.88oz (25g) Renew Descaler.
- Boil the kettle.
- Discard the boiled solution.
- Rinse and boil again with fresh water.
For Coffee Brewers:
- Add 0.88oz (25g) of powder to 33.81oz (1L) of warm water and dissolve.
- Refer to the manufacturer's instructions.
- Rinse with potable water.
UPC: 9345941119963
Related Products